2 Years
Remote Support - 1 Hour
€ 80,00 |
New product
Features
QNAP’s QGD-1602P is the world’s first PoE managed switch that supports Virtual Machines (VMs). Featuring 2.5GbE and 10GbE SFP+ ports and up to 90-watt PoE output, the QGD-1602P allows you to build a high-speed and high-power PoE network infrastructure for Wi-Fi 6 Access Points and Routers. With a dual-CPU design, the QGD-1602P uses Intel® Atom® multi-core 2.2GHz processors with two SATA drive bays to support VM and QTS applications. The QGD-1602P not only fulfills IP surveillance, network security, wireless AP management, and storage expansion applications, but also integrates QuWAN to form a SD-WAN architecture with other QNAP devices across multiple sites, helping to build a resilient and secure IT infrastructure. With 20GbE internal bandwidth capacity and Intel® QuickAssist Technology (Intel® QAT), the QGD-1602P achieves the high-performance transmission required for edge computing virtualization and IPsec VPN, and offers SMBs a cost-optimized and centrally managed LAN deployment solution.
Management Type | Web Managed |
CPU | Intel® Atom® C3558 quad-core 2.2 GHz processor |
CPU Architecture | 64-bit x86 |
System Memory | 8 GB (1 x 8 GB) |
Drive Bays | 2 x 2.5-inch SATA 6Gb/s, 3Gb/s |
Number of Ports | 18 |
10GbE SFP+ | 2
10G/1G
|
2.5GbE (RJ45) | 8 |
1GbE (RJ45) | 8 |
Total PoE Ports | 16 |
PoE PSE (802.3af, 15.4W) | Ports 1-16 |
PoE+ PSE (802.3at, 30W) | Ports 1-16 |
PoE++ PSE (802.3bt, 60W) | Ports 1-4 |
PoE Power Output | Ports 1-4 (90W), Ports 5-16 (30W) |
Total PoE Power Budget | 195W |
PCIe Slot | Slot 1: PCIe Gen3 (x4) Slot 2: PCIe Gen3 (x4) |
USB 3.2 Gen 1 port | 2 |
Management Port | 2 x 5GbE ; 2 x 1GbE |
USB 3.2 Gen 2 (10Gbps) Port | Optional via PCIe adapter |
Power Supply Description | Internal Power Supply Unit |
Max. Power Consumption | 280W |
Input Power Type | AC |
Input Voltage Range | 100-240VAC, 50/60 Hz |
MAC Address Table | 32K |
Total Non-Blocking Throughput | 48Gbps |
Switching Capacity | 96Gbps |
Management Interface | Web |
Fan | System: 3 x 4 cm (12V DC) |
Supported Standards | IEEE 802.3u 100Tx Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bz 2.5G/5G BASE-T Multi-Gig Ethernet IEEE 802.3an 10GBASE-T 10G Ethernet IEEE 802.3ae 10GBASE-SR IEEE 802.3ae 10GBASE-LR IEEE 802.3z 1000Base-X IEEE 802.3x Full-duplex flow control IEEE 802.3af/at/bt Power-over-Ethernet (PoE) IEEE 802.1q Virtual LANs (VLAN) IEEE 802.1p QoS Protocol for Traffic Prioritization |
Form Factor | Rackmount |
LED Indicators | Per Port: Link/Activity/Speed/PoE Per System: Warning/PoE/Fan |
LCD Management | Yes |
Buttons | Device PSU power button Host power button Host reset button(load default) Switch reset button |
Dimensions (HxWxD) | 44.2 × 435.2 × 327.7 mm |
Weight (Net) | 4.37 kg |
Weight (Gross) | 5.52 kg |
Operating Temperature | 0°C to 45°C (32°F to 113°F) |
Relative Humidity | 5% to 95% non-condensing, wet bulb: 27˚C (80.6˚F) |
Certifications | CE, FCC, VCCI, BSMI RCM |
Electromagnetic Compliance | CLASS A, UL62368 |
Jumbo Frames | Yes |
QTS Built-in | Yes |
Intel QAT Support | Yes |
Internal Network Bandwidth | 2 x 10GbE |
Floating Point Unit | Yes |
Encryption Engine | (AES-NI) |
Maximum Memory | 64 GB |
Memory Slot | 2 x SODIMM DDR4 |
Flash Memory | 4GB (Dual boot OS protection) |
Drive Compatibility | 2.5-inch bays: 2.5-inch solid-state drives 2.5-inch hard disk drives |
Hot-swappable | Yes |
M.2 SSD Slots | 2 |
SSD Cache Acceleration Support | Yes |
File System: Internal Hard Drive | EXT4 |
File System: External Hard Drive | EXT3, EXT4, NTFS, FAT32, HFS+, exFAT (optional license) |
Warranty | 2 Years |
Downloads
QNAP CAB-DAC30M-SFPP SFP+ 10GbE Twinaxial Direct Attach Cable 3.0m
Contact us to check availability
QNAP CAB-DAC50M-SFPP SFP+ 10GbE Twinaxial Direct Attach Cable 5.0m
Contact us to check availability