Italiano
English GB
Login / Register
Quantity
Total
Product successfully added to your shopping cart
There are 0 products in your cart.
There are 0 products in your cart.
Total
(IVA inc.)
QNAP QDA-UMP4A M.2 PCIe 4.0 NVMe SSD to 2.5” U.2 PCIe NVMe SSD Drive Bay for QNAP NAS
Be the first to write a review
2 Years
Features
The QDA-UMP4A allows installing an M.2 PCIe 4.0 x4 NVMe SSD in a 2.5-inch U.2 (SFF-8639) PCIe 4.0 x4 NVMe SSD drive bay. No extra software or drivers are required for the QDA-UMP4A and it can be installed in a compatible QNAP NAS to enable using M.2 SSDs as cost-effective alternatives to expensive U.2 SSDs.
- Use an M.2 PCIe NVMe SSD in a 2.5 inch U.2 (SFF-8639) PCIe NVMe SSD slot of a QNAP NAS (M.2 SSD sold separately).
- Up to PCIe 4.0 x4 file transfer speeds.
(Compatible with NVMe PCIe 3.0 for M.2 SSDs and U.2 drive bays)
Specifications
| Standard Warranty | 2 years |
| Supported Drives | 1 x M.2 2280 PCIe 4.0 x4 NVMe SSD |
| Host Interface | U.2 (SFF-8639) PCIe 4.0 x4 |
| Supported Operating Systems | QTS 5.x / QuTS h5.x (or later) |
| Dimensions (L x W x H) | 100.4 × 69.85 × 7 mm |
Note: QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.
Datasheet
