UBIQUITI UniFi® Door Hub - UA-Hub-Door

Mechanical

Dimensions

• 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3 in.)

Weight

• 363 g (12.8 oz.)

Enclosure material

• Polycarbonate

Mounting material

• Polycarbonate

Hardware

Networking interface

• 5 x 10/100/1000 Base-T

Power method

• PoE++
• UL 294 Power-limited Class 2 PSU
• UL 60950-1/62368-1 LPS/PS2 PSU

Max. power consumption

• Without PoE output: 30W
• With PoE output: 50W

PoE input

• 50V DC, 1A

PoE output

• PoE passthrough, (4) PoE, 50V DC, total 20W

LEDs

• White/blue

Button

• 1 x Factory-reset

Digital input

• Request to exit/request to enter/remote release/door position sensor

Dry output relay

• Lock: 30V DC, 1A
• Aux: 30V DC, 1A

Powered output relay

• Lock: 12V DC, 1A
• Aux: 12V DC, 0.33A
• 12V DC, 0.33A

Recommend max. cable length

• 18 AWG length (UACC-Cable-DoorLockRelay):
• UA-Lock-Electric (400mA): 100 m (328 ft.)
• UA-Lock-Magnetic-270kg (800mA): 46 m (151 ft.)
• UA-Lock-Magnetic-540kg (500mA): 80 m (262 ft.)
• Other locks (1A): 36 m (118 ft.)
• 20 AWG length:
• UA-Lock-Electric (400mA): 66 m (217 ft.)
• UA-Lock-Magnetic-270kg (800mA): 30 m (98 ft.)
• UA-Lock-Magnetic-540kg (500mA): 51 m (167 ft.)
• Other locks (1A): 24 m (79 ft.)
• 22 AWG length:
• UA-Lock-Electric (400mA): 42 m (138 ft.)
• UA-Lock-Magnetic-270kg (800mA): 20 m (66 ft.)
• UA-Lock-Magnetic-540kg (500mA): 32 m (105 ft.)
• Other locks (1A): 15 m (49 ft.)
• 24 AWG length:
• UA-Lock-Electric (400mA): 25 m (82 ft.)
• UA-Lock-Magnetic-270kg (800mA): 12 m (29 ft.)
• UA-Lock-Magnetic-540kg (500mA): 20 m (66 ft.)
• Other locks (1A): 9 m (30 ft.)

PoE cabling requirements

• Cable 5e cabling is the minimum performance category recommended. The performance category utilised should match the transmission speed required at the installation site.
• The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.

Operating environment

• Indoor use only

Ambient operating temperature

• 0°C to 40°C (32°F to 104°F)

Ambient operating humidity

• 5% to 95% noncondensing

UL 294 level

• Destructive attack: Level I
• Line security: Level I
• Endurance: Level I
• Standby power: Level I

UL 294 statement

• Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.
• The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 Grade

• Grade assignment: 1

Certifications

• CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document number, and issue date and/or revision level

• UA-Hub-Door002, V01