Partners

UBIQUITI PowerBeam® M5 ISO 5 GHz airMAX® Bridge with RF Isolated Reflector 25dBi PBE-M5-400-ISO

12 Months

PBE-M5-400-ISO-EU

New product

€ 119,00IVA incl.

Contact us to check availability

This product is currently not available

Brand: UBIQUITI Networks

 
Description

Overview

Ubiquiti Networks launches the PowerBeam™ ISO, an airMAX Bridge that is ideal for deployments requiring maximum performance and RF isolation.

Improved Noise Immunity

The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Radio Design

Ubiquiti’s InnerFeed™ technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.

Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely versatile and cost‑effective to deploy.

airMAX Technology Included

Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.

This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class.

Intelligent QoS Priority assigned to voice/video for seamless streaming.

Scalability High capacity and scalability.

Long Distance Capable of high‑speed, carrier-class links.

 

Hardware Overview

Innovative Mechanical Design

  • Metal-plated interior of rear housing Enhances RF shielding.
  • Built-in mechanical tilt The mounting bracket offers ± 20° of tilt.
  • Convenient pole-mounting Only a single wrench is needed to mount the PowerBeam ISO on a pole.

Industrial-Strength Construction

  • Fasteners GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners.
  • Dish and brackets Made of galvanized steel that is powder‑coated for superior corrosion resistance.
  • Protective radome Shields the radio from nature's harshest elements.

Breakthrough RF Isolation

The integrated isolator design spatially filters out interference, so the PowerBeam ISO delivers improved noise immunity in co-location deployments.

Both near-field plots are displayed in watts and use a linear scale. The strength of the electromagnetic field is color-coded:

  • Red: Highest strength
  • Green: Medium strength
  • Indigo: Lowest strength

Compare the two near-field plots below, and note the superior performance of the integrated RF isolator.

 

pb-m5-iso-feature-rf-isolation-plot.jpg

Per ulteriori informazioni, visitare il sito di questo prodotto.

Write a review

UBIQUITI PowerBeam® M5 ISO 5 GHz airMAX® Bridge with RF Isolated Reflector 25dBi PBE-M5-400-ISO

Write a review

 PBE-M5-300-ISOPBE-M5-400-ISO
System Information
Processor Specs Atheros MIPS 74Kc, 560 MHz Atheros MIPS 74Kc, 560 MHz
Memory 64 MB DDR2, 8 MB Flash 64 MB DDR2, 8 MB Flash
Networking Interface (1) 10/100 Ethernet Port (1) 10/100/1000 Ethernet Port
Physical / Electrical / Environmental
Dimensions 364 x 364 x 276 mm (14.33 x 14.33 x 10.87") 459 x 459 x 261 mm (18.07 x 18.07 x 10.28")
Weight 2.55 kg (5.62 lb) 3.22 kg (7.10 lb)
Power Supply 24V, 0.5A PoE 24V, 0.5A Gigabit PoE
Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Passive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range 20-26VDC 18-26VDC
Max Power Consumption 6 W 8 W
Gain 22 dBi 25 dBi
Wind Loading 210 N @ 200 km/h (47 lbf @ 125 mph) 390 N @ 200 km/h (88 lbf @ 125 mph)
Wind Survivability 200 km/h (125 mph) 200 km/h (125 mph)
LEDs (1) Power, (1) LAN, (4) WLAN (1) Power, (1) LAN, (4) WLAN
Signal Strength LEDs Software-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes 5/8/10/20/30/40 MHz
Polarization Dual Linear
Enclosure Outdoor UV Stabilized Plastic
Mounting Pole-Mount Kit Included
ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV
Operating Temperature -40 to 70° C (-40 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test IEC 68-2-6
Temperature Shock Test IEC 68-2-14
UV Test IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
Regulatory / Compliance Information
Wireless Approvals FCC, IC, CE
RoHS Compliance Yes
Operating Frequency Summary (MHz)
Worldwide 5170 - 5875 MHz

Menu

Top