12 Months
PBE-5AC-400-ISO-EU
New product
Overview
Ubiquiti Networks launches the PowerBeam™ ac ISO, an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation.
Improved Noise Immunity
The PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.
Integrated Radio Design
Ubiquiti’s InnerFeed™ technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
Application Examples
airMAX ac Technology Included
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class.
Intelligent QoS Priority assigned to voice/video for seamless streaming.
Scalability High capacity and scalability.
Long Distance Capable of high‑speed, carrier-class links.
Superior Performance
The next-generation airMAX ac technology boosts the advantages of our proprietary TDMA protocol.
Ubiquiti’s airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
Throughput Breakthrough
airMAX ac supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in airMAX.
With their use of proprietary airMAX ac technology, airMAX ac products supports up to 450+ Mbps real TCP/IP throughput – up to triple the throughput of standard airMAX products.
Hardware Overview
Innovative Mechanical Design
Industrial-Strength Construction
Breakthrough RF Isolation
The integrated isolator design spatially filters out interference, so the PowerBeam ISO delivers improved noise immunity in co-location deployments.
Both near-field plots are displayed in watts and use a linear scale. The strength of the electromagnetic field is color-coded:
Compare the two near-field plots below, and note the superior performance of the integrated RF isolator.
Per ulteriori informazioni, visitare il sito di questo prodotto.
PBE-5AC-400-ISO Specifications | |
---|---|
System Information | |
Processor Specs | Atheros MIPS 74Kc, 560 MHz |
Memory | 64 MB DDR2, 16 MB Flash |
Networking Interface | (1) 10/100/1000 Ethernet Port |
Physical / Electrical / Environmental | |
Dimensions | 459 x 459 x 261 mm (18.07 x 18.07 x 10.28") |
Weight | 3.22 kg (7.10 lb) |
Power Supply | 24V, 0.5A Gigabit PoE |
Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Supported Voltage Range | 20-26VDC |
Max Power Consumption | 8.5 W |
Gain | 25 dBi |
LEDs | (1) Power, (1) LAN, (4) WLAN |
Signal Strength LEDs | Software-Adjustable to Correspond to Custom RSSI Levels |
Channel Sizes | PtP Mode: 10/20/30/40/50/60/80 MHz PtMP Mode: 10/20/30/40 MHz |
Max. VSWR | 1.5:1 |
Built-In Mechanical Downtilt | ± 20° |
Polarization | Dual Linear |
Enclosure | Outdoor UV Stabilized Plastic |
Mounting | Pole-Mount Kit Included |
Wind Loading | 559 N @ 200 km/h (125.7 lbf @ 125 mph) |
Wind Survivability | 200 km/h (125 mph) |
ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
Operating Temperature | -40 to 70° C (-40 to 158° F) |
Operating Humidity | 5 to 95% Noncondensing |
Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration Test | IEC 68-2-6 |
Temperature Shock Test | IEC 68-2-14 |
UV Test | IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 |
Wind-Driven Rain Test | ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |
Regulatory / Compliance Information | |
Wireless Approvals | FCC, IC, CE |
RoHS Compliance | Yes |
Operating Frequency Summary (MHz) | |
Worldwide | 5150 - 5875 MHz |