Italiano
English GB
Login / Register
QNAP TL-R400S 4-bay Rackmount SATA JBOD Storage Enclosure
3 Years
Compatible Hard Disks
Warranty Extensions & Services
Expansion Card
Request a customized quotation for complete packages including hard disks and/or compatible UPS solutions by contacting our sales department at +39 0824 600815 or send an e-mail to sales@dnltrading.com
Features
High-performance short-depth rackmount SATA 6GB/s JBOD storage enclosure
TL-R400S Rackmount JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-R400S features four 3.5-inch SATA 6Gb/s drive bays, the shallow rack design is perfect for installing the TL-R400S in a compact rack, or in areas with a lot of cabling. TL-R400S comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
Notes:
1. QNAP recommends following the standard procedure for connecting or disconnecting the TL-R400S. For more information, please see the TL-R400S user manual.
2. The TL-R400S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-R400S.
3. The TL-R400S only supports QNAP NAS running on QTS 4.4.2 (or above) or QTS hero operating system.
- High-capacity TL SATA JBOD not only can expand NAS storage, but also Windows® and Ubuntu® computers and servers.
- SFF-8088 (or SFF-8644) connection cable supports four SATA 6Gb/s channels per cable (24Gb/s in total) and provides faster data transfer speeds than eSATA and USB.
- The short depth rackmount NAS is perfectly suited for installation in a compact rack, or places with a lot of cabling.
Specifications
| Audio Alert On/Off Switch | Yes |
| Form Factor | 1U Rackmount |
| Host Interface | 1 x SFF-8088 |
| LED Indicators | HDD 1-4, Status, Link, Fan error |
| Buttons | Power switch |
| Max. number of HDDs/SSDs supported | 4 x 3.5-inch SATA 6Gb/s |
| Hard Drive Type | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
| Operating temperature | 0 - 40 °C (32°F - 104°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | 100W PSU, 100 - 240V |
| Power Consumption: Operating Mode, Typical | 25.07 W
With Seagate ST6000NM0024 fully polulated
|
| Fan Mode Switch | Yes (Auto, high, medium, low) |
| Fan | 2 x 40mm, 12VDC |
| Sound Level | 22.1 db(A) |
| System Warning | Buzzer |
| Kensington Security Slot | Yes |
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS.
Designs and specifications are subject to change without notice.
Download
Datasheet
User Guide 
