Partners

Mimosa B24 24GHz 33dBi 1.5 Gbps Gigabit Fiber-Ready Backhaul Radio

12 Months

100-00074

New product

€ 875,00IVA incl.

In Stock

- +

Brand: Mimosa

 
Description

Overview

Breaking through the barriers of price, size, and power requirements, the B24 delivers up to 1.5 Gbps of aggregate speed in the less crowded and unlicensed 24 GHz frequency band. By dynamically adjusting bandwidth based on upstream and downstream demand, the B24 efficiently delivers the most usable bandwidth possible with 1 ms low-latency, to meet modern internet traffic needs. The B24 is revolutionizing the industry, satisfying the needs of customers in multiple applications and verticals.

Lightweight, Low Power

At a fraction of the weight, size, and power of alternative solutions, the B24 is incredibly easy to install and fits into any setting. At 6 lbs and consuming 19.5 W, the B24 is great for battery backup installations.

Fiber Ready

For flexibility, redundant ethernet and fiber connections are supported, a feature that was previously only available in stratospherically priced outdoor products.

GPS Sync for Collocation

Like other Mimosa products, GPS synchronization allows collocated B24 radios to share the same channel, permitting up to eight links to operate on the same rooftop, each running at 1.5 Gbps.

Reliable Shorthaul

With superior reliability compared to the congested 5 GHz band, the B24 goes the distance even in the rain with reliable links up to 3 km (2 mi), and reaching farther than other 60/70/80 GHz alternatives.

Features

• Gigabit Ethernet: 10/100/1000-BASE-T

• Fiber Capable: Supports SFP interface for fiber operation

• Ethernet Redundancy: Dual Link failover; Does not support simultaneous ethernet + fiber operation

• Dual Protocol Operation: 2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM

• Management Services: Mimosa cloud monitoring and management SNMPv2 & Syslog monitoring HTTPS HTML5 based web UI (2.4 GHz WiFi management module no longer available as of February 2021)

• Smart Spectrum Management: Active scan monitors/logs ongoing RF interference across channels with no service impact; Dynamic autooptimization of bandwidth, power, and modulation

• Security: 128-bit AES PSK with hardware acceleration

• QoS: Supports 4 pre-configured QoS levels

• GPS Location: GNSS-1 (GPS + GLONASS)

• Collocation Synchronization: 1PPS GPS TX/RX synchronization for collocated co-channel radios; Adjustable up/downstream bandwidth ratio

Applications

• Fixed Wireless Broadband Backhaul

• Business and MDU Rooftop Connections

• Campus Building Connections

• Video Surveillance and WiFi Hotspot Distribution

• Smart City Connectivity

Write a review

Mimosa B24 24GHz 33dBi 1.5 Gbps Gigabit Fiber-Ready Backhaul Radio

Write a review

Performance
Max Throughput: Up to 1.5 Gbps IP aggregate UL/DL
Max PHY rate: 1.7 Gbps PHY
Low Latency: <1 ms
Supported MAC: TDMA, TDMA-FD
Radio
MIMO and Modulation: 4x4:4 MIMO OFDM up to 256 QAM
Bandwidth: Single or dual channel; 20/40/80 MHz channel width
Channel Spacing: Single channel allows 5 MHz channel spacing; Dual channel allows separate, no-overlapping 5 MHz spacing increments
Frequency Range: 24.05 - 24.25 GHz worldwide support; Operating range is 24.07 - 24.23 GHz
EIRP: ~20 dBm (CE)
~33 dBm (FCC/IC)
~37 dBm (other regions)
Min Output Power: -20 dBm
Power Increment Level: 1 dB
Sensitivity (MCS0): -84 dBm @ 80 MHz
-87 dBm @ 40 MHz
-90 dBm @ 20 MHz
Antenna
Gain: 33 dBi
Beamwidth (3dB): 3.0º
Elevation Adjust: +-2.5º azimuth mechanical adjust+-15º elevation mechanical adjust
Front to Back Ratio: >30 dB
Cross-Polar Isolation: >20 dB
Polarization: Dual-linear (slant 45º)
Power
Max Power Consumption: 19.5 W
System Power Method: 48V DC 802.3at compliant
System Lightning & ESD Protection: 6 kV
PoE Power Supply: Passive POE compliant, 50V 1.2A power over ethernet (included)
Physical
Dimensions: Height: 260 mm (10.24”)
Width: 260 mm (10.24”)
Depth: 134 mm (5.3”) without bracket; 252 mm (9.9”) with bracket
Weight: 2.76 kg (6 lbs) including mount
Enclosure Characteristics: Outdoor UV stabilized plastic;
Powder-coated, aluminum mounting panel
Wind Survivability: 200 km/h (125 mph)
Wind Loading: 12.52 kg @ 160 km/h
(27.61 lbs @ 100 mph)
Mounting: Precision lightweight aiming pole mount with +-15º elevation and +-2.5º horizontal adjustment screws
Network Interfaces: Gigabit ethernet
(RJ45) and gigabit fiber (SFP cage); Operation modes: Hot standby
Environmental
Outdoor Ingress Protection Rating: IP67
Operating Temperature: -40°C to +55°C (-40°F to 131°F)
Operating Humidity: 5 to 100% condensing
Operating Altitude: 4,420 m (14,500’) max
Shock & Vibration: ETS 300-019-2-4 class 4M5
Regulatory and Compliance
Approvals: FCC 15.249
IC RSS210
ETSI EN 300-440 V2.1.1
CE
RoHS Compliance: Yes; WEEE
Safety: EC/EN/ 60950-1
Features
Gigabit Ethernet: 10/100/1000-BASE-T
Fiber Capable: Supports SFP interface for fiber operation
Ethernet Redundancy: Dual Link failover; Does not support simultaneous ethernet + fiber operation
Dual Protocol Operation: 2 dual-stream radios operating on non-contiguous frequencies allow for traditional FDD-like performance or TDMA automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM
Management Services: Mimosa cloud monitoring and management SNMPv2 & Syslog monitoring HTTPS HTML5 based web UI (2.4 GHz WiFi management module no longer available as of February 2021)
Smart Spectrum Management: Active scan monitors/logs ongoing RF interference across channels with no service impact; Dynamic auto-optimization of bandwidth, power, and modulation
Security: 128-bit AES PSK with hardware acceleration
QoS: Supports 4 pre-configured QoS levels
GPS Location: GNSS-1 (GPS + GLONASS)
Collocation Synchronization: 1PPS GPS TX/RX synchronization for collocated co-channel radios; Adjustable up/downstream bandwidth ratio

Accessories

Menu

Top