Elsist UPS Flexible On-Line Monofase Doppia Conversione DSP Rack - Tower LCD UPS 10000VA 9000W

INPUT
- Power: 10KVA / 9KW
- Phase: 3 phase 4 wires + GND
- Nominal Voltage: 380/400/415Vac
- Voltage range: 208-478Vac
- Frequency range: 45-55Hz a 50Hz / 56-66Hz a 60Hz (auto detecting)
- Power Factor: >0.99
- Current THDi: <2%(100% non linear load)
- Voltage Bypass range:
* max. voltage:
220Vac:+25% (optional +5%,+10%,+15% )
230Vac:+20% (optional +10%,+15% )
240Vac:+15% (optional +10% )
* min. voltage: -45% (optionale -20%, -30%)
* frequency protection interval: +/-10%
- Genset input : Supported

OUTPUT
- Phase: 3 phase 4 wires + GND
- Nominal Voltage: 380/400/415Vac
- Power Factor: 0.9
- Voltage tolerance: +/-1%
- Frequency:
* with Mains: +/-1%, +/-2%, +/-4%, +/-5%, +/-10% of nominal frequency (optional)
* In battery mode: (50/60 +/-0.1%)Hz
- Crest Factor: 3:1
- THD:
* <1% linear load
* <3% non linear load

- Efficiency (normal operation): >96.5%

BATTERY
- Voltage:
* UPS standard: +/-120Vdc (10+10) 12V 7/9AH
* UPS a lunga autonomy +/-96V, +/-108V, +/-120Vdc (16/18/20 pz. Optional)

- Recharging current (Recharge current is automatically set according to battery capacity, number of batteries and dynamic of battery pack):
* UPS standard (20pcs): 1.35A
* UPS standard (2×20pcs): 2.7A
* UPS standard (3×20pcs): 4.5A
* UPS long autonomy: max 10A
- Battery test: Test runs every 30 days by default

- Switching time:
* from Mains to battery: 0ms
* from Mains to bypass: 0ms

PROTECTION
- Overload:
* Normal operation: Load <110%: duration 60min, <125%: duration10min, <150%: duration 1min, >150% switch to bypass
* Battery operation: Load <110%: duration 10min, <125%: duration 1min, <150%: duration 10s, >150% UPS is switched Off
* Bypass mode: Switch 20A
- Shortcircuit: Include the whole UPS
- Overheating: Normal operation: switch to Bypass, Battery operation: switch Off UPS
- Battery discharged: Alarm and switch Off UPS
- Self test: at UPS start-up or via Software command
- EPO (optional): Switch Off UPS
- Battery: Advanced battery management
- Noise suppression: Compliant to EN62040-2

ALARMS
- Audible and Visible: Mains off, battery discharged, overload, UPS failure

DISPLAY
- LED e LCD status: Mains mode, Bypass mode, Battery discharged, Battery low, overload and failed UPS
- Visible on LCD display: Input Voltage, Input Frequency, Output voltage, Output frequency, Load percentage, Battery voltage, Internal Temperature etc.

COMMUNICATION INTERFACE
- USB, RS485, Parallel (optional), dry contacts, Intelligent Slot, SNMP card (optional), Relay card (optional)

AMBIENT
- Operating temperature: 0C to 40C
- Storage temperature: -25C to 55C
- Humidity: 0% - 95% non condensing
- Altitude: <1500m. If >1500m nominal power is reduced
- Noise: <55dB

OTHERS
- Dimensions (D×W×H): 828×250×868 mm
- Weight (without batteries): 42 kg
- Units: 1
- Safety compliance: CE,EN/IEC 62040-3,EN/IEC 62040-1-1
- Frequency converter function: Yes