DWC-102
The DWC-102 works well with any door, window or opening. When triggered (separated), an alarm signal will be sent to the system controller for appropriate response. It also comes with tamper protection to ensure system integrity, and can work with other wired detectors. If connected to a GSM alarm system, low-battery alerts via SMS text messages are possible.
Features
- Two-way communication with the control panel
- Internal antenna
- Low battery indication panel
- Shatterproof protection (tamper)
- Power supply: DC 1.5V (Battery AA 1.5V LR6)
- Consumption in Standby Mode: ≤ 30uA
- Consumption in Alarm Mode: ≤ 40 mA
- Transmission distance: ≤ 80 m (open area)
- Transmission frequency: 433 MHz (± 75 kHz)
- Panel material: ABS plastic
- Conditions:
- - Temperature: -10ºC ~ 55ºC
- - Humidity: ≤ 80% (non-condensing)
- Dimensions (L x W x H):
- - Transmitter: 71 x 34 x 17.5mm
- - Magnet: 51 x 12 x 13.5 mm
Package Contents:
- 1 x Door/Window Contact sensor
- 1 x Set of screws/tape for installation
- 1 x Battery AA 1.5 V LR6
- Installation Guide