Italiano
English GB
Login / Registra
Quantità
Totale
Prodotto è stato aggiunto al tuo carrello
Ci sono 0 prodotti nel tuo carrello.
Ci sono 0 prodotti nel tuo carrello.
Totale
(IVA incl.)
Mimosa Gigabit Network Interface Device (NID) for CPE Radios
Scrivi una recensione per primo!
12 Mesi
Overview
The Mimosa Gigabit Network Interface Device (NID) is a sleek and cost-effective surge protector or arrestor. It's designed for exterior wall mounting, providing outdoor technician access, ESD (electrostatic discharge) protection and grounding point for any installation that requires Ethernet cabling. The dust and water resistant design has a foam cable entry seal and a security fastener tie point.
Outdoor technician access, ESD protection and grounding point. Easy to install technician physical access interface, with surge supression and grounding point — a must have for any Mimosa installation.
Specifiche
| Mimosa Gigabit Network Interface Device Specifications | |
|---|---|
| Data Transfer Rate | Gigabit rated |
| Connectors | Two (2) RJ-45 |
| Protection Mode | Line-to-line and line-to-ground |
| Surge Arrestor | GTD (Gas Discharge Tube) |
| DC Sparkover | 90V @ 100V/s |
| Impulse Sparkover | 550V @ 1000V/µs |
| Impulse Discharge Current | 10kA |
| Capacitance | < 1.0pF @ 1 MHz |
| Mounting | Wall mount. Two (2) screw mounting points for secure access to flat surface with optional rear feed point for clean installations. |
| Dimensions | 42 mm (1.6”) x 131 mm (5.1”) x 84 mm (3.3”) |
| Weight | 0.13 kg (4.8 oz) |
| Operating Temperature | -40 to +55 C |
| Humidity | 5 to 100% condensing |
| Environmental Protection | IP54 (Dust and Water Intrusion Protection) |
Download
Datasheet
