Partners

Cisco ATA191-3PW-K9 2-Port Analog Telephone Adapter for Multiplatform

12 Mesi

ATA191-3PW-K9

Prodotto nuovo

€ 89,00IVA incl.

Disponibile

- +

Marchio: Cisco

 
Descrizione
Caratteristiche
 
L'adattatore del telefono analogico (ATA) consente di collegare un dispositivo analogico, come ad esempio un telefono analogico o un fax, alla propria rete. Il dispositivo connesso può quindi funzionare analogamente ai telefoni IP nella rete.
L’adattatore del telefono analogico (ATA) ha due interfacce:
  • 1 Porta Ethernet 10/100 per la connettività WAN
  • 2 Porte FXS per telefonici analogici o fax
  • Basato su standard SIP
  • Gestione FAX T.38
 

Scrivi una recensione

Cisco ATA191-3PW-K9 2-Port Analog Telephone Adapter for Multiplatform

Scrivi una recensione

 
Recensioni Verificate(0)

Features

Specifications

Physical dimensions (H×W×D)

3.9 x 3.9 x 1.1 in. (100 × 100 × 28 mm)

Weight

4.7 oz (132.1 g)

Hardware

Interface: Two RJ-11 FXS ports, one 10/100 Mbps RJ-45 Ethernet port

Button: Reset / Problem Reporting (PRT)

LED indicators: Power, Network, Phone 1, Phone 2, PRT Wall mountable

Subscriber Line Interface Circuit (SLIC)

Ring voltage: 40 to 90 Vpk configurable

Ring frequency accuracy: 1%

Ring waveform: Trapezoidal or sinusoidal

Maximum ringer load: 3 Ringer Equivalence Numbers (RENs)

On-hook voltage (tip and ring): -46 to -56V

Off-hook current: 25 mA +/- 10%

Terminating impedance: 600 ohm resistive, 900 ohm resistive, or 220 ohm + 820 ohm

120 nF complex impedance

Frequency response: 300 to 3400 Hz

Return loss (600 ohm, 300 to 3400 Hz): up to 26 dB

Idle channel noise: <-65 dBm 0p

Longitudinal balance: 58 dB (typical)

Voice quality Mean Opinion Score (MOS): >4.0

Voice quality jitter: <150ms

Networking

MAC address

IPv4 only

IPv6 only

IPv4/IPv6 dual stack

Session Initiation Protocol (SIP)

Transmission Control Protocol (TCP)

User Datagram Protocol (UDP)

Real Time Protocol (RTP)

Real Time Control Protocol (RTCP)

HTTP

HTTPS

Trivial File Transfer Protocol (TFTP)

Address Resolution Protocol (ARP)

DNS A/AAAA and SRV records

Dynamic Host Configuration Protocol (DHCP) client

Internet Control Message Protocol (ICMP)

Simple Network Time Protocol (SNTP)

Cisco Discovery Protocol

Link Layer Discovery Protocol (LLDP)

Point-to-Point Protocol over Ethernet (PPPoE)

Quality of Service (QoS)

IEEE 802.1p/Q (QoS and VLAN tagging)

Differentiated Services (DiffServ), Type of Service (ToS)

Telephony

Anonymous call and call blocking

Call forwarding: No answer, busy, and all

Call hold and resume

Caller ID blocking

Caller ID generation (name and number): Bellcore, BT, and European Telecommunications Standards Institute (ETSI)

Caller ID with name and number

Call pickup and group pickup

Call transfer, call return, and call back on busy

Call waiting

Configurable ring frequency

Configurable tones and cadences

Disconnect tone

Distinctive ringing: Calling and called number

Do not disturb

Forced Authorization Code (FAC)/Client Matter Code (CMC)

Flash hook timer

Hook flash event signaling

Hotline and warm line calling

Message Waiting Indicator (MWI) tones

Music on hold

Off-hook warning tone

Polarity control

Redial

Selective and anonymous call rejection

SIP redundancy

Speed dial

Streaming audio server: Up to 4 sessions

Three-way conference calling with local mixing

Tip and ring voltage adjustment setting

Visual Messaging Waiting Indicator (VMWI) using Frequency Shift Keying (FSK)

Network Address Translation (NAT)

Session Traversal Utilities for NAT (STUN)

Audio

Codec: G.711 a-law, G.711 μ-law, G.729a, G.729ab, G.726

Codec name assignment

Full-duplex audio

Echo cancellation

Voice activity detection

Silence suppression

Configurable silence threshold

Comfort noise generation

Adaptive jitter buffer

Frame loss concealment

Adjustable audio frames per packet

Call progress tone generation

Impedance and gain adjustment

Dynamic audio payload

Fax

Real-time fax over IP via T.38 fax relay (Group 3)

Fax pass-through via G.711 (Group 3)

Fax tone detection and pass-through

Automatic negotiation on transmission rate

Provisioning and management

Cloud provisioning (remote configuration)

Web-based administration

Interactive Voice Response (IVR)

Automated provisioning and upgrading via HTTP, HTTPS, and TFTP

TR-069

SSH access

Simple Network Management Protocol (SNMPv3)

Report generation and event logging

Dedicated PRT button

Support for RTP statistics

Syslog (multilevel granularity)

Ping and trace route diagnostics

Configuration management: Backup and restore

Dual image

Security

Password-protected system reset to factory default

Password-protected administrator and user access authority

Provisioning, configuration, and authentication

HTTPS with factory-installed client certificate

Advanced Encryption Standard (AES) encryption

SIP over Transport Layer Security (TLS1.1 and TLS1.2)

Secure (encrypted) calling using Secure RTP (sRTP)

Encrypted configuration files

Image authentication

Secure boot

Secure Shell (SSH)

Power

DC input voltage: 5V DC at 2.4A maximum

Power consumption: 5W

Switching type (100-240V) automatic

Power adapter: 100-240V and 50-60 Hz (26-34 VA) AC input, with 1.8 m cord

Reliability

Mean Time Between Failures (MTBF): 300,000 hours

Operating temperature: 32° to 104°F (0° to 40°C)

Nonoperating temperature: 14° to 140°F (-10° to 60°C)

Humidity: Operating 10% to 90%, noncondensing/nonoperating 10% to 95%, noncondensing

Compliance (regulatory)

CE Markings per directives 2014/30/EU and 2014/35/EU

Compliance (safety)

UL 60950 Second Edition

CAN/CSA-C22.2 No. 60950 Second Edition

IEC 60950-1:2005 (Second Edition) + A1:2009 + A2:2013 and/or AS/NZS 60950.1:2015

Compliance (EMC)

AS/NZS CISPR 32:2015 Class B

CISPR 32: 2015 Class B

EN 55032: 2015 Class B

EN 61000-3-2: 2014 Class A

EN 61000-3-3: 2013

EN 55024:2010+A1: 2015

EN 61000-4-2: 2009

EN 61000-4-3: 2006+A1:2008+A2:2010

EN 61000-4-4: 2012

EN 61000-4-5: 2014

EN 61000-4-6: 2014+AC:2015

EN 61000-4-8: 2010

EN 61000-4-11: 2004

FCC Part 15, Subpart B

ANSI C63.4-2014

ICES-003 Issue 6: 2016

ANSI C63.4-2014

VCCI-TECHNICAL REQUIREMENTS (VCCI-CISPR 32: 2016) /

CISPR 32: 2015 class B

Menu

Top