Partners

UBIQUITI NanoBeam®M NBE-M5-16 5GHz 16dBi High-Performance airMAX® Bridge

12 Mesi

NBE-M5-16-EU

Prodotto nuovo

€ 75,00IVA incl.

Disponibile

- +

Marchio: UBIQUITI Networks

 
Descrizione

Overview

Starting with the first-generation NanoBridge®, Ubiquiti Networks™ pioneered the all-in-one design for an airMAX® product functioning as a CPE (Customer Premises Equipment). Now Ubiquiti Networks launches the latest generation of CPE, the NanoBeam™.

Improved Noise Immunity

Available for the 2.4 and 5 GHz frequency bands, the NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design

The Ubiquiti Research and Development team combined the radio and antenna to create a more efficient and compact CPE. The NanoBeam gets maximum gain out of the smallest footprint.

Providing increased performance from its faster processor and innovative mechanical design at a low cost, the NanoBeam is extremely versatile and cost-effective to deploy.

airMAX Technology Included

Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.

This “time slot” method eliminates hidden node collisions and maximizes airtime efficiency. It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class.

Intelligent QoS Priority is given to voice/video for seamless streaming.

Scalability High capacity and scalability.

Long Distance Capable of high-speed, carrier-class links.

 

Hardware Overview – All-in-One Design

Innovative Mechanical Design

  • All-in-one design The NanoBeam provides both the radio and antenna in the smallest possible footprint.
  • Quick and easy installation No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting.
  • Convenient alignment The NanoBeam pivots on its ball joint for easy aiming.

Compact Form Factor

  • Efficient footprint The radio and antenna are combined into a single body that takes up minimal space.
  • Versatile mounting The NanoBeam can be mounted in almost any position needed for line of sight.
  • Aesthetics The NanoBeam is small enough to blend discreetly into the background at a customer's location.

Optional Isolator Shield Accessory

An RF isolator shield is available as an optional accessory to enhance signal isolation. 

Optional Mounting Accessories

A wall mount kit is available as an optional accessory to enhance stability for wall-mounting.

A suction cup mount is available as an optional accessory to mount the NanoBeam on a window.

Per ulteriori informazioni, visitare il sito di questo prodotto.

Scrivi una recensione

UBIQUITI NanoBeam®M NBE-M5-16 5GHz 16dBi High-Performance airMAX® Bridge

Scrivi una recensione

 
Recensioni Verificate(0)
 NanoBeam M5-16NanoBeam M5-19
System Information
Processor Specs Atheros MIPS 74KC, 560 MHz
Memory Information 64 MB DDR2, 8 MB Flash
Networking Interface (1) 10/100 Ethernet Port
Physical / Electrical / Environmental
Dimensions 140 x 140 x 54 mm
(5.51 x 5.51 x 2.13 in)
189 x 189 x 125 mm
(7.44 x 7.44 x 4.92 in)
Weight 0.320 kg (0.71 lb) 0.530 kg (1.17 lb)
Power Supply 24V, 0.5A PoE 24V, 0.5A PoE
Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) Passive PoE (Pairs 4, 5+; 7, 8 Return)
Max Power Consumption 6 W 8 W
Gain 16 dBi 19 dBi
Wind Loading 21.4 N @ 200 km/h
(4.8 lbf @ 125 mph)
45.4 N @ 200 km/h
(10.2 lbf @ 125 mph)
Wind Survivability 200 km/h (125 mph)
LEDs (1) Power, (1) LAN, (4) WLAN
Signal Strength LEDs Software-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes 5/8/10/20/30/40 MHz
Polarization Dual Linear
Enclosure Outdoor UV Stabilized Plastic
Mounting Pole-Mount (Kit Included), Wall-Mount
ESD/EMP Protection Air: ±24 kV, Contact:± 24 kV
Operating Temperature -40 to 70° C (-40 to 158° F)
Operating Humidity 5 to 95% Non-Condensing
Shock and Vibration ETSI300-019-1.4
Regulatory / Compliance Information
Wireless Approvals FCC, IC, CE
RoHS Compliance Yes
Operating Frequency Summary (MHz)
Worldwide 5150 - 5875
USA 5725 - 5850

Accessori

Menu

Top